Daily game
Play today's city game

Moving from Milwaukee, WI to Atlanta, GA: Distance, Drive Time & Checklist

Moving from Milwaukee, WI to Atlanta, GA means a straight-line distance of about 671 miles (1,079 km) toward the south. By road that is typically 738 to 872 miles, which is 12 h 18 min to 15 h 51 min of non-stop driving. The move involves a change of state from Wisconsin to Georgia and a 1-hour time change (clocks go forward 1 hour when you arrive, in standard time). This page gives you the numbers, a fuel estimate you can adjust, and a checklist.

What are the key numbers for this move?

FromMilwaukee, WI, Wisconsin
ToAtlanta, GA, Georgia
Straight-line distance671 mi (1,079 km)
Direction of travelSouth
Estimated road distance738–872 mi
Estimated driving time12 h 18 min – 15 h 51 min
Driving days at 8 hours a day2
Time zoneCentral → Eastern
State changeYes, WI → GA
Population of Milwaukee1,365,787
Population of Atlanta5,449,398

How far is Milwaukee from Atlanta?

The straight-line (great-circle) distance between the two places is 671 miles, calculated from their coordinates (43.064°N, 87.967°W and 33.763°N, 84.422°W). Roads rarely run straight, so the driving distance is longer. We use a range of 10 to 30 percent more than the straight line, which gives 738 to 872 miles. The real figure depends on the route you choose, the mountains or rivers in between, and where in each city you start and finish. For a precise route, check a navigation app, and read how city distances are calculated.

How long does the drive from Milwaukee to Atlanta take?

At an average moving-truck speed of 55 to 60 miles per hour, the road distance works out to 12 h 18 min to 15 h 51 min of driving. A loaded truck or a trailer is slower than a car, and fuel, meals and rest stops add time, so most people split a trip like this into 2 driving days of about eight hours each. Plan one overnight stop along the way, and avoid arriving after dark at your destination if you can.

How much fuel will the move cost?

Fuel is the one cost this page can estimate from distance alone. The calculator below uses the road-distance range and the fuel economy and price you enter. The starting values are assumptions, not quotes, so replace them with your vehicle's real mileage and today's local price. Mover fees, truck rental rates, tolls and insurance are not included.

 

For comparison, a vehicle that gets 10 miles per gallon would use about 74 to 87 gallons on this route. Illustrative fuel cost at three prices:

Price per gallonFuel cost for 10 mpg
$3.00221–262
$3.75277–327
$4.50332–392

What changes when you move from Milwaukee to Atlanta?

In our data, Atlanta is about 4.0 times as large as Milwaukee. Milwaukee is an urban core at about 6,136 people per square mile, while Atlanta is suburban at about 3,732. Expect a noticeably different pace of daily life, with different distances to shops, work and services. You will also see a 1-hour time change (clocks go forward 1 hour when you arrive, in standard time). These figures are dataset estimates; see how to read density.

MilwaukeeAtlanta
Population1,365,7875,449,398
Density per sq mi6,1363,732
Area typeAn urban coreSuburban
CountyMilwaukee CountyFulton County
ZIP codes3755
Time zoneCentralEastern

What should you put on your moving checklist?

Which other routes are popular?

If you are still deciding where to go or where to start, compare these routes.

Where to go next

Distances, drive times and fuel figures are estimates for planning, not quotes. Always confirm routes and prices with your mover or navigation provider.

Share:FacebookXLinkedInWhatsAppTelegramRedditPinterestEmail