Moving from Fort Worth, TX to Washington, DC: Distance, Drive Time & Checklist

Moving from Fort Worth, TX to Washington, DC means a straight-line distance of about 1,212 miles (1,950 km) toward the northeast. By road that is typically 1,333 to 1,575 miles, which is 22 h 13 min to 28 h 38 min of non-stop driving. The move involves a change of state from Texas to District of Columbia and a 1-hour time change (clocks go forward 1 hour when you arrive, in standard time). This page gives you the numbers, a fuel estimate you can adjust, and a checklist.

What are the key numbers for this move?

How far is Fort Worth from Washington?

The straight-line (great-circle) distance between the two places is 1,212 miles, calculated from their coordinates (32.781°N, 97.347°W and 38.905°N, 77.016°W). Roads rarely run straight, so the driving distance is longer. We use a range of 10 to 30 percent more than the straight line, which gives 1,333 to 1,575 miles. The real figure depends on the route you choose, the mountains or rivers in between, and where in each city you start and finish. For a precise route, check a navigation app, and read how city distances are calculated.

How long does the drive from Fort Worth to Washington take?

At an average moving-truck speed of 55 to 60 miles per hour, the road distance works out to 22 h 13 min to 28 h 38 min of driving. A loaded truck or a trailer is slower than a car, and fuel, meals and rest stops add time, so most people split a trip like this into 3 to 4 driving days of about eight hours each. Because the trip spans several days, book overnight stops that allow truck or trailer parking before you leave.

How much fuel will the move cost?

Fuel is the one cost this page can estimate from distance alone. The calculator below uses the road-distance range and the fuel economy and price you enter. The starting values are assumptions, not quotes, so replace them with your vehicle's real mileage and today's local price. Mover fees, truck rental rates, tolls and insurance are not included.

For comparison, a vehicle that gets 10 miles per gallon would use about 133 to 157 gallons on this route. Illustrative fuel cost at three prices:

What changes when you move from Fort Worth to Washington?

In our data, Washington is about 5.9 times as large as Fort Worth. Fort Worth is suburban at about 2,631 people per square mile, while Washington is an urban core at about 11,544. Expect a noticeably different pace of daily life, with different distances to shops, work and services. You will also see a 1-hour time change (clocks go forward 1 hour when you arrive, in standard time). These figures are dataset estimates; see how to read density.

What should you put on your moving checklist?

• Book a truck, container or movers early, especially for the longest routes and peak summer weeks.
• Get written quotes from at least three movers and confirm whether the price is by weight, volume or hours.
• Update your address with the USPS, your bank, your employer and your insurers, and note that Washington uses 286 ZIP codes, so check the exact code for your new street.
• Check District of Columbia rules for vehicle registration, driver license and voter registration after you arrive.
• Review health, car and renters or home insurance for coverage in District of Columbia.
• Tell recurring contacts about the move to Eastern time, and recheck standing meeting times and medical appointments.
• Plan overnight stops and keep essentials, medications and documents with you rather than in the truck.
• Confirm utilities and internet are scheduled to start on your arrival day.
• Keep a folder of receipts, since some moving costs may matter at tax time. Ask a tax professional.

Which other routes are popular?

If you are still deciding where to go or where to start, compare these routes.

Where to go next

Distances, drive times and fuel figures are estimates for planning, not quotes. Always confirm routes and prices with your mover or navigation provider.